OGS掃邊機主要用途：

該機適用于玻璃、藍寶石等非金屬硬脆性材料制作的薄片零件的多面成型拋光，如OGS玻璃掃邊拋光。It’s used for polishing multi-surface non-metal and brittle material, such as the perimeter sides of OGS glass, sapphire, etc.

OGS掃邊機主要特點：

1.本機可對薄片零件的周邊進行拋光，一次可裝夾多片。

2.左右兩個拋光頭同時對工件拋光，由伺服電機通過絲桿驅動拋光頭，相對工件做插補運動，拋光壓縮量穩定，拋光效率高。

3.左右拋光頭通過直線導軌同時由絲桿升降機驅動做同步上、下直線運動，使玻璃拋光均勻，不會出現紋路，拋光效果好。

4.配有噴液裝置，拋光液通過砂泵電機，從兩個拋光頭內部噴出，均勻的噴射在工件上。

5.拋光頭采用拋光皮制作，可以達到理想的拋光效果。

6.通過在人機界面編輯好加工程序，再下載至PLC，PLC就會按當前下載的程序運行。

7.采用PLC控制，控制方式靈活可靠。

8.用觸摸屏做為人機界面顯示報警和機床狀態的實時信息；介面友好信息量大。

9.控制元器件均采用24V電源，PLC電源采用隔離變壓器供電，降低外界電網雜波干擾提高了機床的穩定性。
 

1.Polishing the perimeter sides of a stack of thin workpiece at the same time

2.Polish the workpieces with interpolation motion by 2 polishing head at the same time,driven by servo motor and lead screw, stable amount of polishing compression, high polishing efficiency 

3.Vertical motion of polishing heads, driven by lead screw lift and linear guideway to make polishing smooth, no trace.

4.Spray system of polishing liquid, supplied by sand pump, spray to workpiece uniformly from polishing heads inside

5.Polishing pad or bristle of polishing heads, to make sure ideal polishing effect

6.The machine at work through the editing processing procedure on HMI, and then downloaded to the PLC, PLC will be run by the current downloaded program

7.PLC controlling, which it is flexible and reliable

8.Touch screen, it is convenient to show alert information and real situation. Besides, the interface is friendly and the information is huge.

9.24VDC of control components, PLC is supplied by isolation transformer, external electric wave interference is lowered, and the safety of the machine is greatly raised.

主要技術參數 Main technical perameters